![]() If everything is working correctly, you will see a login screen on the client PC, but you will not be able to login. Reboot the server and connect a client PC on the network. If you prefer a 32bit image then run the following : sudo ltsp-build-client -arch i386 The above command will install by default an 64bit ubuntu image. For the server : sudo apt-get install ltsp-server-standaloneįor the client environment : sudo ltsp-build-client Lets log in to the linux box and install LTSP server with the following commands. ip dhcp-server add name=lab interface=ether1 address-pool=lab_pool bootp-support=static ![]() So, in this guide, I assume that my local network is 192.168.1.0/24, my mikrotik device is the gateway of the network and has an interface ( ether1) with IP address 192.168.1.1 and my linux box has the ip address 192.168.1.10 and runs ubuntu server 16.04. My case has a DHCP server working on mikrotik routerOS. ![]() All guides install the DHCP server on the same box. You will find many guides on the internet on how to install a LTSP server. We just need a DHCP service (with specific options like 66, 67, 17), a linux box running the LTSP server and some client PCs connected to the same network. Just imagine PCs without a hard drive, running linux over the network. LTSP ( Linux Terminal Server Project), adds thin client support to Linux servers.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |